When you work with hot tar on a daily basis, whether it is in the commercial roofing business or in the asphalt business, there is one specific tool that you will rely on more than anything else: your hot tar hose. Even though hot tar hoses are often considered to be a lesser important thing that you can just replace as needed, it is always better if you spring for higher quality hoses. there are huge downfalls to using a hot tar hose that is not well-built. Take a look at some of the pitfalls of relying on low-grade hot tar hoses.
The tar hose springs leaks quickly.
If you are getting leaks in the hot tar hoses you are using, it is a typically a sign that the hose is not as high-temperature resilient as it should be. Unfortunately, tar hoses that are created out of basic synthetic polymers will break down quickly when the hot tar is pushed through, which means you will get some spots in the hose that pretty much melt away to reveal pores that allow leaks. These kinds of leaks will usually show up as tar hanging out on the outside of the hose in small amounts but will grow larger as time goes on.
The tar hose kinks easily.
Having to wrestle with a tar hose because it continuously kinks and bends to get in a bind can drastically decrease your productivity when you are working. Kinking and bending are some of the most common problems with low-grade hot tar hoses. The reason this problem occurs is because the inner lining that should include a metal helix is either made of poor quality materials or not as strong as it should be. In some cases, the inner metal helix will break down with age, which is natural, but if this is happening not long after you get the hose, it means you are getting low-quality hoses.
The tar hose breaks down at connecting points.
Having the ability to connect attachments to the hose makes your tasks easier, but if the end of the hose is breaking down, it can make it impossible to connect anything to the end of the hose at all. With lower quality tar hoses, the multiple plies can start to separate at the end of the hose, which will break any couplers away from the material and prevent proper connections.
Contact a company, like Copperstate Hose, for more help.
Share
